(858) 467-7111 | Info@voiceandvideosales.com | 4909 Ruffner St. San Diego, CA 92111 | M-F, 9am-5pm

Rental Teradek Bolt 500 XT Wireless Video Systems

Rental

VVS10994

To rent, give us a call or email rentals@voiceandvideosales.com

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter

With the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 500 receiver with zero latency. The Bolt XT is compatible with existing third-generation Bolt systems such as the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the Bolt LT. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 500' line of sight.

A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers. Built-in AES-128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

  • Backward compatible with third-generation Bolt 500, 1000, 300, Sidekick II, and 703 Bolt
  • HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • 1/4"-20, 3/8"-16, and ARRI rosette mounting points
  • UPC: 818264023150

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver

With the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 500 transmitter with zero latency. The Bolt XT is compatible with existing third-generation Bolt systems such as the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the Bolt LT. The receiver unit can be secured via built-in 1/4"-20 or M3 threaded holes.

A light stand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES-128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

  • Backward compatible with third-generation Bolt 500, 1000, 300, Sidekick II, and 703 Bolt
  • The receiver includes built-in cross conversion and Teradek's proprietary software utilities including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • OLED Screen with menu joystick navigation
  • 1/4"-20 and M3 mounting points



Related Items